EDCDAILY
KNIVES2,847
BRANDS156+
NEWS...
DEALSLIVE
social

Fritz Haase Revenant NKD: A 63 HRC MagnaCut Custom Lands as a Bushcraft Main on r/knives

GenericSeptember 2, 2026Source: Reddit r/knives

Custom knife day on r/knives brought a German maker into the spotlight: the Fritz Haase Revenant. The owner's NKD post describes a build that is "a bit different than his normal Revenants" โ€” and the differences are all the ones bushcrafters obsess over. The blade is 12 centimeters of MagnaCut at 63 HRC, hardened to the high end of the steel's practical range, and it arrives with a sharpening choil, that small notch at the base of the edge that makes field maintenance dramatically easier.

The specifications tell a careful story. MagnaCut is the current darling of the outdoor world for good reason โ€” its blend of toughness, corrosion resistance, and edge retention is arguably unmatched among stainless steels, which is why custom makers keep adopting it. At 63 HRC, Haase is pushing the steel for edge stability, a choice that rewards a maker confident in both his steel and his heat treat. The 12cm blade length also happens to be a legal-carry-friendly dimension in Germany, where the owner is based โ€” a reminder that knife laws shape design choices far more than most American buyers realize.

The owner's rotation explains where the Revenant fits: it becomes the main bushcraft and camp knife, while the Skookum Bushtool โ€” also by Fritz Haase โ€” handles woodworking duty. Two knives from the same maker, split into camp chores and carving chores, is about as coherent a system as a fixed-blade user can run.

Fritz Haase is a name that rewards attention in custom circles. Known for practical, no-nonsense outdoor knives with excellent ergonomics, his work has been steadily gaining a following among European bushcrafters and, increasingly, collectors worldwide. A Revenant in this configuration is a solid introduction to his philosophy: hard-use geometry, sensible steel, and details like the choil that only reveal their value in the field.

For anyone shopping the custom bushcraft market, posts like this are the equivalent of a field report โ€” and the report card here is emphatically positive.

Fritz HaaseRevenantcustom knifeMagnaCut63 HRCbushcraftGerman makersharpening choilNKDoutdoor knife

๐Ÿ“ฐ More
socialPro-Tech16h ago
A Dessert Warrior Godfather Shows Up on Reddit
A Pro-Tech Godfather in the donut-themed Dessert Warrior finish turned up on r/knifeclub, and the thread is a lesson in why exclusives sell.
socialZero Tolerance16h ago
ZT's 0452BLUCF Brings MagnaCut to a Sinkevich Flipper
A Zero Tolerance 0452BLUCF in MagnaCut posted to r/knifeclub shows the Sinkevich flipper platform still has a following in 2026.
socialChris Reeve KnivesNov 1
Why the CRK Umnumzaan Still Surprises People on the Inside
A teardown post of the Chris Reeve Umnumzaan shows why the knife's pivot bushing remains one of the most imitated ideas in folders.
socialSpydercoNov 1
The Spyderco PM2 Thread Is Really About Why One Design Endures
A bare 'PM2' post drew the kind of response only a handful of knives get, which says something about how the Paramilitary 2 stays relevant.
Never miss a knife drop ๐Ÿ”ช
Daily newsletter โ€” news, deals, crowdfunding, and brand gossip.