Most novelty mechanisms on knives are solutions looking for a problem. The NexoMorph is the rare one where the second configuration is actually useful: the same 2.95-inch blade can sit in a 6.98-inch folding knife or rotate into a 5.42-inch push dagger held between two fingers.
Numbers: WE24037B-2, 2.95-inch Bohler M390 drop point at 0.13 inch stock, 59-61 HRC, flat grind, stonewashed finish, 6AL4V titanium handle in gray, brass morphing button, stainless folding button, caged ceramic ball bearings, button lock, 4.28 ounces. In the fixed position the knife measures 6.98 inches overall and 1.41 inches wide; in the push position it measures 5.42 inches by 2.58 inches, with a 2.47-inch closed section.
What is happening mechanically is that the handle is not a single rigid piece. The two halves can pivot relative to each other around a second axis so the frame opens into a T shape, letting the blade be gripped with the index and middle fingers straddling it. WE is careful to note that the button lock has a spring under the button providing enough resistance to prevent accidental opening while still releasing cleanly, which is the kind of note a company writes when it knows people will worry about a mechanism with two pivots.
The honest assessment of the push configuration: it is a last-resort tool, not a daily driver. A push dagger grip gives you a very secure hold and almost no leverage for cutting, so it is good for punching through material and bad for slicing anything. Where it earns its place is in a kit where a fixed blade would be illegal or awkward โ that shape at 5.42 inches fits a pocket that a 7-inch fixed blade will not.
Compared with the Sine Wave Mystery Box at $415, the NexoMorph costs $125 more and gives you the mechanism instead of a lottery knife. Compared with WE's Temper at $370, you are paying for engineering rather than size. Against a $540 custom, you are getting production consistency and a warranty, and giving up the hand-fit.
Verdict: buy it if the morphing mechanism genuinely solves a carry problem for you, or if you collect mechanisms. Skip it if you want a knife that cuts well, because 0.13 inch of M390 in a 4.28-ounce frame is being carried for the trick, not the geometry.
We earn a commission if you make a purchase through these links, at no extra cost to you.