A Spyderco PITS 2 slipjoint headlined a r/EDC pocket dump that mixed titanium pens, a prytool, and one very good lighter — 42 upvotes of taste.

Two days past the promised 60-day window, a MagnaMax Manix 2 pre-order still reads 'awaiting fulfillment' — and r/knifeclub has questions.

A first-time PM2 buyer asked which steel to pick from seven options — and the answers turned into a crash course on edge retention versus toughness.

An old Spyderco Endura 4 pulled from a box of junk became one member's first Spyderco — after a teardown, a clean, an oil, and a sharpen.

A plain-edge Persistence in S35VN at $49.99 sent one r/BudgetBlades member straight back to the 8Cr13Mov days — and the value math still holds up.

Rockscale flat titanium scales and RGT purple hardware turned one member's Para 3 Salt into a fully 'purped out' custom — with a PM2 to match.

Spyderco's 1997 classic returns for Labor Day: the Jess Horn Lockback in full-dress carbon fiber with a CPM Cru-Wear blade, live at KnivesShipFree.

Rubber angle guides left marks on a new Spyderco Shaman's DLC coating — and the r/knives thread turns a QC scare into a sharpening how-to...

Bruce at Flaming Gorilla iterates with an r/knifeclub member to build contoured Fatcarbon scales for a Manix 2 MagnaMax — and the community...

An r/knifeclub member acid-etches a Cru-Carta PM2 into a 'Striderco' hybrid — first-try masking included — and the community loves the result...

Spyderco and Blade HQ reteam on the Tenacious Tanto: the same $80 jade-G10 silhouette, now with a black oxide blade, liners, lock, and clip...

A new Manix 2 Salt owner asks r/knifeclub whether slightly uneven G10 milling is normal — a familiar QC question with a reassuring community answer.

An r/knifeclub member lines up the Manix family 'fresh from the work desk' — a photo tribute to Spyderco's hard-working, lock-barred workhorse line.

A new-knife-day post shows the Spyderco Sage 6 in REX121 with RGT scales — one of Spyderco's most exotic steels in a button-compression-lock platform.

The Paramilitary 2, Para 3, Smock, and Shaman are among Spyderco folders discounted 25 percent at KnivesShipFree — a rare USA-made deal.

An r/knifeclub member's new Spyderco Lil Native — a Cutlery Shoppe exclusive — opens the week with a wish for a compression-lock Native 5.

A before-and-after 'spa treatment' on r/knifeclub shows a Spyderco 15V blade cleaned and refreshed — and why high-vanadium steel needs the care.

KnivesShipFree's National Knife Day sale discounts Spyderco's strict MAP pricing, the Benchmade Adamas, and a MagnaCut Kershaw Livewire.

A decade of PM2 and Manix 2 carry gave way to a Spyderco Stretch 2 XL — an r/knifeclub member's first backlock, chosen for cardboard and fruit duty.

KnivesShipFree is moving Spyderco's PM2, Para 3, and other Golden-made folders at 25 percent off — a rare discount on the Colorado brand.

r/knifeclub's 'First Spyderco: Manix 2 Magnacut' thread has become a community case for the Manix 2 as a premium Spyderco entry point.

A Spyderco Sliverax NKD on r/knifeclub spotlights the Paul Alexander flipper — 3.5-inch S30V with a Compression Lock in carbon fiber/G-10.

Spyderco's non-locking folders — UKPK in S110V or BD1N, the Squeak, and the Dog Tag — deliver modern EDC features without a mechanical lock.

"My top three Spyderco blades. What's yours?" — the r/knives ranking thread that turned into a full-scale debate over the brand's deepest catalog.

A PM2 Salt post on r/knives highlights Spyderco's corrosion-proof classic — LC200N and all — and the community's love for a legend in new form.

A woman on r/knives was told collecting knives 'isn't very ladylike' — the thread became a rallying point for the community's response.

After years of wanting one, an r/knives member finally landed a Spyderco Smock — the grail-acquisition post that captures the hobby perfectly.

An r/EDC member swapped his Ontario RAT 1 for a camo-scaled Spyderco Para 3 — a carry rounded out by Streamlight, Nite Ize, and Popov Leather.

A r/knifeclub member asked if his traded Spyderco was real — and got a forensic reply covering machining, lettering, screws, and even kerning.

A r/knives comparison argues the Hogue K320 AXS beats the Spyderco Manix 2 on ergonomics and action — while conceding the Manix is slicier.

A Native 5 SPY27 NKD on r/knives praises the ergonomics and geometry — then starts a debate about USA-made Spyderco QC versus Taiwan's fit and finish.

An r/knives first-timer shares a Spyderco Blade HQ exclusive — quality that has the new owner already planning the next purchase.

An r/knifeclub user mods a Spyderco Mini Swayback by cutting the lock bar down to expose more of the Spydie hole.

A Spyderco Stretch 2 in K390 arrives as an NKD on r/knifeclub — the leaf-shaped workhorse getting one of the hobby's favorite high-wear steels.

Spyderco's 50th-anniversary year has delivered sprint runs, new silhouettes, and featherweight surprises — here are the 13 best drops of 2026 so far.

Tuesday's pocket check on r/knifeclub is a tradition — and a Spyderco PM2 with titanium scales and a tanto blade is a perfect flex.

A new Spyderco Sage 5 LW Salt lands on r/knives — the corrosion-proof Salt line keeps adding EDC icons for beach, boat, and kitchen duty.

A Spyderco Sage post on r/knifeclub highlights the line's quiet brilliance — compression locks, proven steels, timeless design.

Handmade copper shipwreck scales on a Spyderco Byrd Tern turn a budget knife into a one-of-one carry — the forced-patina mod of the week.

A jade G10 Tanto Tenacious has r/knives predicting the next hype cycle — and reminiscing about the Dessert Warrior phenomenon.

A first-time Spyderco owner shows off a PM2 Leftie on r/knifeclub — and the comments flood in with Para 3 praise and S45VN love.

A r/knives member confesses to owning multiple Paramilitary 2s — and the community's response is less intervention, more 'show us the collection.

An r/knifeclub member fits olive wood scales to a Spyderco PM2 to match their VW Bug — a customization post that shows the modding side of the hobby.

While everyone wants a PM2 tanto, one r/knifeclub member just wants Spyderco to re-release the Tatanka in CruWear — and the thread agrees.

A titanium-handled PM2 in Maxamet shows up on r/knives — the rare Spyderco flex that blends premium scale material with a wild steel.

A Spyderco Lil Native post on r/knives is the latest chapter in the small-knife love affair — proof the compact icon endures.

Spyderco refreshes the Techno for its third generation with REX 121 super steel, contoured titanium handle, and the signature wire pocket clip.

Spyderco expands its Salt series with the Native 5 Salt in MagnaCut, offering premium corrosion resistance for marine and humid environments.

Spyderco has released the Para 3 Lightweight in several new color options just in time for summer. The Para 3 Lightweight, already one of the most...

Spyderco founder Sal Glesser transitions to an advisory role with son Eric Glesser assuming lead design responsibilities.